PUBLICATIONS

For the most recent publications, please refer to Google Scholar Profile. 

Journal Articles

  • Forsling, H.P., Gutkowski, R.M., Radford, D.W., and Balogh, J., “Load Tests of Damaged Railroad Timber Stringers Repaired by Shear Spiking”, Structures and Buildings, ISSN: 0965-0911, Vol 165, No.SB6, June 2012, pp. 309-321.
  • O’Rourke, B.D., Radford, D.W. and Stanglmaier, R.H., “Tri-Axial Force Measurements on the Cylinder of a Motored SI-Engine Operated on Lubricants of Differing Viscosity”, ASME Journal of Engineering for Gas Turbines and Power, Vol.132, No.9, September 2010.
  • Peterson, M.L., Reiser, II, R.F. Kuo, Pei-Hsin, Radford, D.W., McIlwraith, C.W., “The Effect of Temperature on Race Times on a Synthetic Surface”, Equine Veterinary Journal, Vol.42, No.4, 2010, pp. 351-357. (doi: 10.1111/j.2042-3306.2010.00072.x)
  • Gutkowski, R.M., Miller, N.J., Radford, D.W. and Balogh, J., “Z-Spike Rejuvenation of Timber Railroad Bridge Members”, Structures and Buildings, ISSN: 0965-0911, Vol 163, No.4, August 2010, pp. 275-284.
  • Radford, D.W. and Antonio, A., “Enhancing the Deformation of Shape Memory Sandwich Panels”, Strain: An International Journal for Experimental Mechanics, (2010) doi: 10.1111/j.1475-1305.2009.00722.x.
  • Bridge, J.W., Peterson, M.L., Radford, D.W. and McIlwraith, C.W., “Thermal Transitions in High Oil Content Petroleum-Based Wax Blends used in Granular Sport Surfaces”, Thermochimica Acta Journal, 498, 2010, pp.106-111.
  • Radford, D.W., “Balancing Mechanisms of Distortion to Yield Distortion Free/Shape Stable Composites”, Journal of Reinforced Plastics and Composites, Vol. 29, No.12, 2010, pp. 1875-1892. doi:10.1177/0731684409340707
  • Radford, D.W., Grabher, A.E., and Bridge, J.W., “Inorganic Polymer Matrix Composite Strength Related to Interface Condition”, Materials, 2(4), 2216-2227; 2009, doi:10.3390/ma2042216.
  • Holloway, B.L. and Radford, D.W., “Mechanical Coupling Due to Composite Structural Damage and Repair”, SAE International Journal of Materials and Manufacturing, Vol. 1, No.1, April 2009, pp.849-858.
  • Burgers, T.A., Gutkowski, R.M., Balogh, J., and Radford, D.W., “Repair of Full-Scale Timber Bridge Chord Members by Shear Spiking”, Journal of Bridge Engineering, Vol. 13, No.4, July/August 2008, pp.310 – 318.
  • Gutkowski, R.M., Schilling, T.J., Balogh, J., and Radford, D.W., “FRP Z-Spike Repairing of Wood Railroad Crossties”, Journal of Structural Engineering, Vol. 134, No.2, 2008, pp.248 – 257.
  • Buckley, R., Radford, D.W., and Stanglmaier, R.H., “Characterization and Processing of Carbon Fiber Reinforced PETI-RFI”, Journal of Advanced Materials, Vol. 40, No.2, 2008, pp.17 – 32.
  • Melo, J.D.D and Radford, D.W., “Time and Temperature Dependence of the Viscoelastic Properties of CFRP by Dynamic Mechanical Analysis”, Journal of Composite Structures, Vol.70, 2005, pp.240-253.
  • Melo, J.D.D and Radford, D.W., “Viscoelastic Properties of PEEK/IM7 Related to Temperature”, Journal of Reinforced Plastics and Composites, Vol.24, No.5, 2005, pp.545-556.
  • Melo, J.D.D. and Radford, D.W., “Time and Temperature Dependence of the Viscoelastic Properties of PEEK/IM7”, Journal of Composite Materials, Vol.38, No.20, 2004, pp.1815-1830.
  • Radford, D.W., Scott, E., and Fitzhorn, P.A., “A Liftless Electronic 100ms Shift System For Motorcycle-Engined Racecars”, SAE Transactions, Journal of Engines, 2003, p.2796.
  • Weidner, L.R., Radford, D.W., and Fitzhorn, P.A., “A Multi-Shell Assembly Approach Applied to Monocoque Chassis Design”, SAE 2002 Transactions, Journal of Passenger Cars – Mechanical Systems, 2003, p.2486.
  • Radford, D.W., Peterson, M.L., Senan, A., and Fitzhorn, P.A., “Application Of Dynamic Mechanical Analysis To The Evaluation of Tire Compounds”, SAE 2002 Transactions, Journal of Passenger Cars – Mechanical Systems, 2003, p.2492.
  • Melo, J.D.D and Radford, D.W., “Elastic Properties of PEEK/IM7 Related to Temperature”, Journal of Reinforced Plastics and Composites, Vol.22, No.12, 2003, pp.1123-1139.
  • Melo, J.D.D and Radford, D.W., “Determination of the 3-D Viscoelastic Constants of Transversely Isotropic Laminae by Dynamic Mechanical Analysis”, Journal of Composite Materials, Vol.37, No.2, 2003, pp.129-145.
  • Melo, J.D.D and Radford, D.W., “Elastic Characterization of PEEK/IM7 Using Coefficients of Thermal Expansion”, Composites, Part A, Vol.33, 2002, pp.1505-1510.
  • Radford, D.W., VanGoethem, D., Gutkowski, R.M., and Peterson, M.L., “Composite Repair of Timber Structures”, Construction and Building Materials, Vol.16, 2002, pp.417-425.
  • Melo, J.D.D and Radford, D.W., “Determination of the Elastic Constants of a Transversely Isotropic Lamina using Laminate Coefficients of Thermal Expansion”, Journal of Composite Materials, Vol.36, No.11, 2002, pp.1321-1329.
  • Radford, D.W. and Rennick, T.S., Separating Sources of Manufacturing Distortion in Laminated Composites, Journal of Reinforced Plastics and Composites, Vol.19, No.8, 2000, pp.621-641.
  • Olivero, D.A. and Radford, D.W., “Non-Contact Percolation and Conductivity in Microsphere Composites”, Journal of Advanced Materials, Vol. 31, No.1, 1999, pp.42 – 50.
  • Olivero, D.A. and Radford, D.W., “A Multiple Percolation Approach to EMI Shielding Composites Incorporating Conductive Fillers”, Journal of Reinforced Plastics and Composites, Vol. 17, No.8, 1998, pp.674-690.
  • Radford, D.W. and Goetschel, D.B., “Multi-Shell Composite Pressure Vessel Development”, Journal of Advanced Materials, Vol. 28, No.4, July 1997, pp.8-19.
  • Goetschel, D.B. and Radford, D.W., “Analytical Development of Through-Thickness Properties of Composite Laminates”, Journal of Advanced Materials, Vol. 28, No.4, July 1997, pp.37-46.
  • Barber, B.W. and Radford, D.W., “Impact Fatigue Behavior of Composite Tube/Metal End Fitting Bonded Joints”, Composites Engineering, Vol. 5, No.8, 1995, pp.995-1009.
  • Radford, D.W., “Volume Fraction Gradient Induced Warpage in Curved Composite Plates”, Composites Engineering, Vol. 5, No.7, 1995, pp.923-934.
  • Gray, S., Ganchev, S., Qaddumi, N., Beauregard, G., Radford, D., and Zoughi, R., “Porosity Level Estimation in Polymer Composites Using Microwaves”, Materials Evaluation, Vol. 53, No.4, March 1995, pp.404 – 408.
  • Radford, D.W., “Volume Fraction Effects in Ultra-Lightweight Composite Materials for EMI Shielding”, Journal of Advanced Materials, Vol. 26, No.1, October 1994, pp.45 – 53.
  • Radford, D.W. and Zelenak, S., “Effect of Flux Temperature on Dual Resin Bond Performance”, Journal of Advanced Materials, Vol. 25, No.2, January 1994, pp.54 – 62.
  • Radford, D.W., “Cure Shrinkage Induced Warpage in Flat Uni-Axial Composites”, Journal of Composites Technology & Research, JCTRER, Vol. 15, No.4, Winter 1993, pp. 290-296.
  • Radford, D.W. and Cheng, B.C., “Metallized Microballoon Filled Composite EMI Shielding Materials”, Journal of Testing and Evaluation, JTEVA, Vol. 21, No.5, September 1993, pp.396 – 401.
  • Radford, D.W. and Cheng, B.C., “Ultra-Lightweight Composite Materials for EMI Shielding”, SAMPE Quarterly, Vol. 24, No.4, July 1993, pp.54 – 61.
  • Zelenak, S., Radford, D.W. and Dean, M.W., “Dual Resin Bonded Joints in Polyetheretherketone (PEEK) Matrix Composites”, SAMPE Quarterly, Vol. 24, No.3, April 1993, pp.38 – 46.
  • Radford, D.W. and Diefendorf, R.J., “Shape Instabilities in Composites Resulting from Laminate Anisotropy”, Journal of Reinforced Plastics and Composites, Vol 12, No.1, January 1993, pp.58 – 75.
  • Radford, D.W., Winckler, S.J., and Diefendorf, R.J., “Asymmetric Composites”, Kovové Materiàly (Metallic Materials), Vol.26, No.2, 1988, pp.209 – 213.

Conference Proceedings

  • Rahman, S. and Radford, D.W., “Inorganic Polymer Matrix Material Processing Optimization”, 45th International SAMPE Technical Conference, Wichita, KS, Oct. 22, 2013.
  • Radford, D.W. and Nivala, P.T., “DMA as a Method of Measuring Toughness in Inorganic Polymer Matrix Composites”, ICCM-19, Montreal, Canada, August 2013.
  • Radford, D.W., Buchler, C., Rollin, M. and Nivala, P.T., “Elevated Temperature Structural Properties Evaluation of a SiC Reinforced Polysialate Matrix Composite”, SAMPE 2013, Long Beach, CA, May 2013.
  • Radford, D.W. and Nivala, P.T., “Co-Molded Metallic Components as Thermal Barrier Protection in Resin Transfer Molded Composite Valves for Internal Combustion Engines”, 43rd International SAMPE Technical Conference, Fort Worth, TX, Oct. 18, 2011.
  • Radford, D.W. and Nivala, P.T., “Process Improvements for the Resin Transfer Molding of Composite Intake Valves for Internal Combustion Engines”, 42nd International SAMPE Technical Conference, Salt Lake City, UT, Oct. 12, 2010.
  • Nivala, P.T. and Radford, D.W., “The Effectiveness of Toughness Modifications of Inorganic Polymer Matrix Composites as Measured by Static Flexure Testing”, 42nd International SAMPE Technical Conference, Salt Lake City, UT, Oct. 12, 2010.
  • Radford, D.W. and Nivala, P.T., “Dynamic Mechanical Analysis Assessment of the Effectiveness of Toughness Modifications of Inorganic Polymer Matrix Composites”, SAMPE 2010, Seattle, WA, May 2010.
  • Radford, D.W. and Antonio, A., “Shape Memory Sandwich Panels”, ICCM-17, Edinburgh, Scotland, July 2009.
  • O’Rourke, B.D., Radford, D.W. and Stanglmaier, R.H., “Tri-Axial Force Measurements on the Cylinder of a Motored SI-Engine Operated on Lubricants of Differing Viscosity”, Paper #ICES2009-76037, Proceedings of the ASME ICES2009, Milwaukee, WI, May 2009.
  • Leahy, P.D., Antonio, A. and Radford, D.W., “Shape Memory Composites Applied to the Construction of a Conformable Racing Car Seat”, Paper #2008-01-2973, SAE Motorsports Engineering Conference, Charlotte, NC, December 2 – 4, 2008.
  • Cate, D. and Radford, D.W., “Determining the Effect of Material Properties on Operating Temperatures of Fiber Reinforced Internal Combustion Engine Poppet Valves”, Paper #2008 01-2946, SAE Motorsports Engineering Conference, Charlotte, NC, December 2 – 4, 2008.
  • Holloway, B.L. and Radford, D.W., “Mechanical Coupling due to Composite Structural Damage and Repair”, Paper #2008-01-2940, SAE Motorsports Engineering Conference, Charlotte, NC, December 2 – 4, 2008.
  • Buckley, R.T. and Radford, D.W., “RTM of High Temperature Polymers for Engine Valves”, 39th International SAMPE Technical Conference, Cincinnati, OH, Nov. 1, 2007.
  • Nelson, J.L. and Radford, D.W., “Tailored Structural Damping from Embedded Nano-Composite Layers”, Paper #2006-01-3649, SAE Motorsports Engineering Conference, Dearborn, MI, December 5 – 7, 2006.
  • O’Rourke, B.D., Stanglmaier, R.H., and Radford, D.W., “Development of a Floating-Liner Engine for Improving the Mechanical Efficiency of High-Performance Engines”, Paper #2006-01-3636, SAE Motorsports Engineering Conference, Dearborn, MI, December 5 – 7, 2006.
  • Buckley, R.T., Miwa, J.T., Stanglmaier, R.H., and Radford, D.W., “Light-Weight Valve Train Development for High Performance Engines”, Paper #2006-01-3635, SAE Motorsports Engineering Conference, Dearborn, MI, December 5 – 7, 2006.
  • Holloway, B.L., Radford, D.W., and Weidner, L.R., “Static Compliance Measurement as a Method of Assessing Damage”, Paper #2006-01-3616, SAE Motorsports Engineering Conference, Dearborn, MI, December 5 – 7, 2006.
  • Antonio, A., Nivala, P., and Radford, D.W., “Tailoring the Energy Absorption Profile of a Carbon Fiber Impact Attenuator”, Paper #2006-01-3615, SAE Motorsports Engineering Conference, Dearborn, MI, December 5 – 7, 2006.
  • Radford, D.W., Fitzhorn, P.A., Sakurai, H. and Stanglmaier, R.H., “Engineering the Motorsport Engineer”, Paper #2006-01-3609, SAE Motorsports Engineering Conference, Dearborn, MI, December 5 – 7, 2006.
  • Burgers, T., Gutkowski, R.M., Balogh, J. and Radford, D., “Shear Spike Repair of Timber Railroad Bridge Chord Members”, Proceedings, IABSE Symposium on Responding to Tomorrow’s Challenges in Structural Engineering, Budapest, Hungary, 2006.
  • Gutkowski, R.M., Radford, D. and Shilling, T., “Composite Repair of Railroad Cross-Ties by Shear Spiking”, Proceedings, Structural Faults and Repair-2006, Edinburgh, Scotland, 2006.
  • Miwa, J., Buckley, R., Stanglmaier, R, and Radford, D.W., “Exploring the Potential Advantages of Light-Weight Valves in Internal Combustion Engines”, Proceedings of the ICES2006 May 2006, Paper No. ICES2006
  • Buckley, R., Miwa, J., Radford, D.W., and Stanglmaier, R., “Design Process for Resin Transfer Molded, Fiber Reinforced Poppet Valves for Internal Combustion Engines”, Proceedings of the ICES2006, May 2006, Paper No. ICES2006-1319.
  • Buckley, R., Stanglmaier, R., Radford, D.W., and Willson, B., “A Prediction of Weight Reduction and Performance Improvements Attainable through the use of Fiber ReinforcedComposites in I.C. Engines”, Powertrain & Fluid Systems Conference & Exhibition, San Antonio, TX, Oct. 24, 2005.
  • Dummer, D.L. and Radford, D.W., “A 3-D Percolation Model for Conductive Particulate Composites”, 36th International SAMPE Technical Conference, SanDiego, CA, Nov. 15 – 18, 2004.
  • Kamonpet, Patrapon and Radford, D.W., “The Effect of Physical Part Constraint on Manufacturing Distortion”, 36th International SAMPE Technical Conference, SanDiego, CA, Nov. 15 – 18, 2004.
  • Pansare, Niraj P. and Radford, D.W., “Part-Tool Interaction Induced Distortion on Flat Tooling Plates”, 36th International SAMPE Technical Conference, SanDiego, CA, Nov. 15 – 18, 2004.
  • Harper, T.W. and Radford, D.W., “A Quantitative Approach to Determining the Foaming Parameters for Polymers”, 36th International SAMPE Technical Conference, SanDiego, CA, Nov. 15 – 18, 2004.
  • Radford, D.W. P.C. Fuqua, and L.R. Weidner, “Tooling Development for a Multi-Shell Monocoque Chassis Design”, 36th International SAMPE Technical Conference, SanDiego, CA, Nov. 15 – 18, 2004.
  • Perica-Tripalo, A. and Radford, D.W., “Montmorillonite Nanoclays as Reinforcements in Thermoplastic Polyimide Matrix Nanocomposites”, 36th International SAMPE Technical Conference, SanDiego, CA, Nov. 15 – 18, 2004.
  • VanGoethem, D. and Radford, D.W., “Design of Structually Coupled Composite Beams Under Combined Bending and Tension Loading”, 36th International SAMPE Technical Conference, SanDiego, CA, Nov. 15 – 18, 2004.
  • Melo, J.D.D. and Radford, D.W., “Viscoelastic Properties Of Composite Laminated Beams By Dynamic Mechanical Analysis”, COBEM 2003.
  • Radford, D.W. and Fu, S., “A Route To Shape Correct/Shape Stable Laminates”, ICCM14, San Diego, CA, July 2003.
  • Melo, J.D.D. and Radford, D.W., “Time and Temperature Dependence of the Viscoelastic Properties of PEEK/IM7”, ICCM14, San Diego, CA, July 2003.
  • Radford, D.W., Scott, E., and Fitzhorn, P.A., “A Liftless Electronic 100ms Shift System For Motorcycle-Engined Racecars”, Paper #2002-01-3322, SAE Motorsports Engineering Conference, Indianapolis, IN, December 2 – 5, 2002.
  • Goldenstein, L.K., Radford, D.W., and Fitzhorn, P.A., “The Effect of Nanoparticle Additions on the Heat Capacity of Common Coolants”, Paper #2002-01-3319, SAE Motorsports Engineering Conference, Indianapolis, IN, December 2 – 5, 2002.
  • Weidner, L.R., Radford, D.W., and Fitzhorn, P.A., “A Multi-Shell Assembly Approach Applied to Monocoque Chassis Design”, Paper #2002-01-3360, SAE Motorsports Engineering Conference, Indianapolis, IN, December 2 – 5, 2002.
  • Radford, D.W., Peterson, M.L., Senan, A., and Fitzhorn, P.A., “Application Of Dynamic Mechanical Analysis To The Evaluation Of Tire Compounds”, Paper #2002-01-3361, SAE Motorsports Engineering Conference, Indianapolis, IN, December 2 – 5, 2002.
  • Melo, J.D.D. and Radford, D.W., “Viscoelastic Properties of PEEK/IM7 Related to Frequency”, 15th Brazilian Congress of Engineering and Science of Materials – CBECIMAT, Natal, RN, Brazil, November 9 – 13, 2002.
  • Peterson, M.L., Sun, M., Senan, A., Horton, K., Radford, D.W. and Thompson, L., “Dynamic Materials Characterization of Marine Composites”, 17th Technical Conference, American Society for Composites, Purdue, October 21 – 23, 2002.
  • Suwardie, J.H., Melo, J.D.D. and Radford, D.W., “Measurement of Viscoelastic Properties of PEEK/IM7 by Dynamic Mechanical Thermal Analysis (DMTA)”, Ninth International Conference on Composites Engineering (ICCE-9), San Diego, CA, July 1 – 6, 2002.
  • Radford, D.W., VanGoethem, D.J., Peterson, M.L., and Gutkowski, R., “Composite Repair of Timber Structures”, Structural Faults and Repair 2001, London, England, July 4 – 6, 2001.
  • Radford, D.W., Peterson, M.L., and VanGoethem, D.J., “Composite Repair of Timber Structures”, Society of Experimental Mechanics Annual Conference on Experimental Mechanics, Portland, OR, June 4 – 6, 2001.
  • Melo, J.D.D. and Radford, D.W., “Evaluation of Damage Initiation using Sub-Scale Flexure Testing”, Society of Experimental Mechanics Annual Conference on Experimental Mechanics, Portland, OR, June 4 – 6, 2001.
  • VanGoethem, D.J. and Radford, D.W., “A Sub-Scale Flexure Test for High Modulus Composites”, 31st International SAMPE Technical Conference, Chicago, IL, Oct. 26 – 30, 1999.
  • Melo, J.D.D. and Radford, D.W., “Modeling Manufacturing Distortions in Flat, Symmetric, Composite Laminates”, 31st International SAMPE Technical Conference, Chicago, IL, Oct. 26 – 30, 1999.
  • Fu, S. and Radford, D.W., “Effects of Lamination Angle on the 3-D Thermal Expansion Coefficients”, 31st International SAMPE Technical Conference, Chicago, IL, Oct. 26 – 30, 1999.
  • Radford, D.W. and Ross, R.A., “Densification of C/C Composites using Pulsed Chemical Vapor Infiltration”, ICCM-12, Paris, France, July 6 – 9, 1999.
  • Radford, D.W. Fu, S., Derringer, D. and Davis, J.D., “Measurement of Manufacturing Distortion in Flat Composite Laminates”, ICCM-12, Paris, France, July 6 – 9, 1999.
  • Olivero, D.A. and Radford, D.W., “Mechanical Performance of Compression Molded and Injection Molded Blends of LaRC Polyimide and Polyetherimide (PEI)”, ICCM-11, Gold Coast, Australia, July 14 – 18, 1997.
  • Radford, D.W. and Rennick, T.S., “Determination of Manufacturing Distortion in Laminated Composite Components”, ICCM-11, Gold Coast, Australia, July 14 – 18, 1997.
  • Rennick, T.S. and Radford, D.W., “Components of Manufacturing Distortion in Carbon Fiber/Epoxy Angle Brackets”, 28th International SAMPE Technical Conference, Seattle, WA, Nov. 4 – 7, 1996.
  • Olivero, D.A. and Radford, D.W., “Integrating EMI Shielding into Composite Structure”, 28th International SAMPE Technical Conference, Seattle, WA, Nov. 4 – 7, 1996.
  • Radford, D.W. and Carlson, E.D., “Bonded, Multi-Shell Composite Pressure Vessel Development”, 28th International SAMPE Technical Conference, Seattle, WA, Nov. 4 – 7, 1996.
  • Radford, D.W., Olivero, D.A., Lukes, S. and Zoughi, R., “Microwave Nondestructive Investigation of Multiple Impacted Composite Laminates”, ICCM-10, Vancouver, Canada, August 14 – 18, 1995.
  • Radford, D.W. and Sadeh, W.Z., “Role of Volume Fraction in Composite EMI Shielding”, IAF-94-I.5.210 45th Congress of the International Astronautical Federation, Jerusalem, Israel, Oct. 9 – 14, 1994.
  • Radford, D.W. and Barber, B.W., “Impact Fatigue Behavior of Composite Tube/Metal End Fitting Bonded Joints”, First International Conference on Composites Engineering (ICCE/1), New Orleans, LA, August 28 – 31, 1994.
  • Radford, D.W., Ganchev, S.I., Qaddoumi, N., Beauregard, G. and, Zoughi, R.,”Millimeter Wave Nondestructive Evaluation of Glass Fiber/Epoxy Composites Subjected to Impact Fatigue”, International Symposium on Optics, Imaging, and Instrumentation, SPIE, San Diego, CA, July 24 – 29, 1994.
  • Zoughi, R., Ganchev, S.I., Bhattacharyya, J., Gray, S. and Radford, D.W., “Microwave Diagnosis of Carbon Black Rubber Compounds and Porosity Estimation in Composites”, MRS Spring ’94 Conference, San Francisco, CA, April 4 – 8, 1994.
  • Radford, D.W., Sadeh, W.Z., and Cheng, B.C., “Composite Materials Microstructure for Radiation Shielding”, IAF-92-0324 43rd Congress of the International Astronautical Federation, Washington, D.C., Sept. 1992.
  • Radford, D.W., Sadeh, W.Z., and Cheng, B.C., “Composite Materials for Structures on Planetary Surfaces”, Space ’92, Engineering, Construction, and Operations in Space, American Society for Civil Engineers, Denver, CO., June 1992.
  • Zelenak, S., Radford, D.W., and Dean, M.W., “The Performance of Carbon Fiber Reinforced PEEK Sub-Assemblies Joined Using the Dual Resin Bonding Approach”, 37th International SAMPE Symposium and Exhibition, Anaheim, CA., March 1992.
  • Radford, D.W., Sadeh, W.Z., and Cheng, B.C., “Materials Issues for Lunar/Martian Structures”, IAF-91-302 42nd Congress of the International Astronautical Federation, Montreal, CANADA, October 1991.
  • Radford, D.W. and Cheng, B.C., “Ultra-Lightweight EMI Shielding Materials”, 6th Technical Conference – Composite Materials, Mechanics and Processing, American Society for Composites, Albany, NY., October 1991, (Technomic Publishing Co.).
  • Diefendorf, R.J., Radford, D.W., and Winckler, S.J., “Asymmetric Composites – Hygrothermal Stability of Flat Plates”, Verbundwerk, 91 – 3rd International Conference on Reinforced Materials and Composite Technologies, Weisbaden, Germany, October 1991.
  • Radford, D.W., “Manufacturing Warpage in Flat Uni-axial Composite Laminates”, 5th Technical Conference – Composite Materials in Transition, American Society for Composites, East Lansing, MI., June 1990, (Technomic Publishing Co.).
  • Radford, D.W., “A Technique for Measuring the Through-Thickness Properties of Laminated Composite Materials”, Industry-University Advanced Materials Conference II, Materials Research Society, Denver, CO., March 1989.
  • Radford, D.W. and Diefendorf, R.J., “Shape Instabilities in Composites Resulting from Laminate Anisotropy”, 4th Japan-United States Conference on Composite Materials, Washington, DC., June 1988, (Technomic Publishing Co.).
  • Radford, D.W. and Teghtsoonian, E., “Fracture Toughness of Carbon Fibre-Epoxy Composites”, International Conference on Testing, Evaluation and Quality Control of Composites, Surrey University, Guildford, England, September 1983, Editor: T. Feest.