Refereed Journal Publications

 

 (Underlining indicates graduate advisee)

 

  1. van de Lindt, J.W., H. Liu, and S. Pei. (2006). “Performance of a Woodframe Structure During Full-Scale Shake Table Tests: Drift, Damage, and Effect of Partition Wall.”  ASCE Journal of Performance of Constructed Facilities, In Press.

 

  1. van de Lindt, J.W. and R. Gupta. (2006). “Damage and Damage Prediction for Wood Shearwalls Subjected to Simulated Earthquake Loads.”  ASCE Journal of Performance of Constructed Facilities, In Press.

 

  1. van de Lindt, J.W. and M.W. Drewek. (2006). “Inverse-FORM Modeling for Initial Seismic Retrofit.”  International Journal of Modeling and Simulation, In Press.

 

4.      van de Lindt, J.W. (2005). “Modeling Earthquake Risk Based on Approximate Nonlinear Reliability Estimates.” International Journal of Modeling and Simulation, 25(3), 202-209.

 

  1. van de Lindt, J.W., T.M. Ahlborn, and S. Kethu. (2005). “Alternate Approach to Approximate Deteriorated Steel Beam End Capacity.” Transportation Research Record: Journal of the Transportation Research Board, 2005.

 

  1. van de Lindt, J.W., J.N. Huart. and D.V. Rosowsky. (2005). “Strength-Based Seismic Reliability of Wood Shearwalls.”  ASCE Journal of Structural Engineering, 131(8), 1307-1312.

 

  1. van de Lindt, J.W., T.M. Ahlborn, and M.E. Lewis. (2005). “Practical Fatigue/Cost Assessment of Steel Overhead Sign Support Structures Subjected to Wind Load.” Wind and Structures, an International Journal, 8(5), 343-356.

 

  1. van de Lindt, J.W. and H.A. de Melo e Silva. (2005). “Uniform Serviceability Load Limits for Mechanical Flange Connectors.”  ASCE Practice Periodical on Structural Design and Construction, 10(1), 34-39.

 

  1. van de Lindt, J.W., G. Fu, Y. Zhou, and R.M. Pablo Jr. (2005). “Locality of Truck Loads and Adequacy of Bridge Design Loads.”  ASCE Journal of Bridge Engineering, 10(5), 622-629.

 

  1. van de Lindt, J.W. (2005). “Damage-Based Seismic Reliability Concept for Woodframe Structures.” ASCE Journal of Structural Engineering, 131(4), 668-675.

 

  1. van de Lindt, J.W. and D.V. Rosowsky. (2005). “Strength-Based Reliability of Wood Shearwalls Subjected to Wind Load.”  ASCE Journal of Structural Engineering, 131(2), 359-363.

 

  1. van de Lindt, J.W. and J.M. Niedzwecki (2005). “Structural Response and Reliability Estimates: A Slepian Model Approach.” ASCE Journal of Structural Engineering, 131(10), 1620-1628.

 

  1. van de Lindt, J.W. and G-H Goh. (2004). “Effect of Total Earthquake Duration on Structural Reliability.” Engineering Structures, 26 (2004), 1585-1597.

 

  1. van de Lindt, J.W. and G. Goh. (2004). “An Earthquake Duration Effect on Structural Reliability.” Journal of Structural Engineering, 130(5), 821-826.

 

  1. van de Lindt, J.W. (2004). “Evolution of Wood Shear Wall Testing, Modeling, and Reliability Analysis: A Bibliography.” ASCE Practice Periodical on Structural Design and Construction, 9(1), 44-53.

 

  1. Ahlborn, T.M., J.W. van de Lindt, and M.E. Lewis. (2004). “Cost and Performance Comparison of the Nation’s Overhead Sign Support Structures.” Transportation Research Record: Journal of the Transportation Research board.

 

  1. van de Lindt, J.W. and M.A. Walz (2003) “Development and Application of a Wood Shear Wall Reliability Model.” ASCE Journal of Structural Engineering, Vol. 129, No. 3, 405-413.

 

  1. van de Lindt, J.W. and Niedzwecki, J.M. (2002) “An Inverse-Reliability Approach to Generating Composite Seismic Response Spectra.” International Journal of Modeling and Simulation, Vol.22, No.1, 47-56.

 

  1. van de Lindt, J.W. and J.M. Niedzwecki (2000) “Methodology for Reliability-Based Design Earthquake Identification.” ASCE Journal of Structural Engineering, Vol. 126, No.12, 1420-1426.

 

  1. van de Lindt, J.W. and J.M. Niedzwecki (2000) “Environmental Contour Analysis in Earthquake Engineering.” Engineering Structures, Vol. 22, No. 12, 1661-1676.

 

  1. Niedzwecki, J.M., J.W. van de Lindt, J.H. Gage, and P.S. Teigen. (2000) “Design Estimates of Surface Wave Interaction with Compliant Deepwater Platforms.” Journal of Ocean Engineering, 27, 867-888.

 

  1. van de Lindt, J.W. and J.M. Niedzwecki (1999) “Reliability Estimates for Multi-peaked Random Seas.” International Journal of Offshore and Polar Engineering, Vol.9, No.3, 12-17.

 

  1. Niedzwecki, J.M., J.W. van de Lindt, and E.W. Sandt, (1999) “Characterizing Random Wave Surface Elevation Data.” Journal of Ocean Engineering, 26, 401-430.

 

  1. Niedzwecki, J.M., J.W. van de Lindt, and J.T.P. Yao, (1998) “Estimating Extreme Tendon Response Using Environmental Contours.” Engineering Structures, Vol. 20, No. 7, 601-607.

 

 

 
 
In Review as of March 2006

 

 

  1. van de Lindt and J.W., H. Liu. (2005). “Non-Structural Elements in Performance-Based Seismic Design of Woodframe Structures.”  Submitted to the ASCE Journal of Structural Engineering, August 2005.

 

  1. van de Lindt, J.W. (2005). “Buckling Reliability of Deteriorating Steel Beam Ends.”  Submitted to the Electronic Journal of Structural Engineering, September 2005.
 

3.       Agarwal, V.K., J.M. Niedzwecki, and J.W. van de Lindt. (2005). “Earthquake Induced Pounding in Friction Varying Base Isolated Buildings.” Submitted to Engineering Structures: The Journal of Earthquake, Wind, and Ocean Engineering, June 2005

 

4.       Pei, S., J.W. van de Lindt, W. Pang, and D.V. Rosowsky (2005). “Evolutionary Parameter Hysteretic Model for Wood Shearwalls I: Concept” To be submitted to the ASCE Journal of Structural Engineering, January 2006.

 

5.       W. Pang, D.V. Rosowsky, Pei, S., J.W. van de Lindt, and (2005). “Evolutionary Parameter Hysteretic Model for Wood Shearwalls II: Model Implementation and Applications” To be submitted to the ASCE Journal of Structural Engineering, January 2006.

 

6.       van de Lindt, J.W. and T.N. Dao. (2006). “Evolutionary Algorithm for Performance-Based Shearwall Design in Buildings Subjected to Multiple Load Types” Submitted to the ASCE Journal of Structural Engineering, January 2006.

 

7.       van de Lindt, J.W., A. Graettinger, R. Gupta, T. Skaggs, S. Pryor, and K. Fridley. (2006). “Performance of Woodframe Structures During Hurricane Katrina.” Submitted to the ASCE Journal of Performance of Constructed Facilities, January 2006.

 

8.       Goode, J.S. and J.W. van de Lindt. (2006). “Development of a Semi-Prescriptive Selection Procedure for Reliability-Based Fatigue Design of High Mast Lighting Structural Supports.” Submitted to the ASCE Journal of Performance of Constructed Facilities, March 2006.

 

 

 

Conference Proceedings

 

1.       van de Lindt, J.W. and D.V. Rosowsky. (2005). “Code-Based Reliability of Wood Shearwalls Subject to Natural Hazard Loads.”  ICOSSAR 05, Rome, Italy.

 

2.      van de Lindt, J.W., K. Cuellar, and L.B. Sandberg. (2005). “Steel Overhead Sign Support Structural Design: Meeting AASHTO 2001.”  84th Annual  Meeting of the Transportation Research Board. (presented – van de Lindt)

 

3.      van de Lindt, J.W., T.M. Ahlborn, and S. Kethu. (2005). “An Alternate Approach to Approximate Deteriorated Steel Beam End Capacity.” 84th Annual  Meeting of the Transportation Research Board. (presented – van de Lindt)

 

3.       van de Lindt, J.W., H.A. de Melo e Silva, J.N. Huart, and D.V. Rosowsky. (2004). “Reliability of Wood Shearwalls to Natural Hazard Loading.”  2004 Conference on Woodframe Housing Durability and Disaster Issues, Las Vegas, NV (presented – van de Lindt).

 

4.       van de Lindt, J.W. and G. Fu. (2004). “Highway Bridge Design Load and Locality of Truck Loads.” Proceedings at the IABSE Symposium on Metropolitan Habitats and Infrastructure, Shanghai, China, September 22-24, 2004.

 

5.       van de Lindt, J.W. and M.W. Drewek. (2004). “Performance-Based Design of Base Isolation Systems using Inverse-FORM.”  Proceedings and presentation at the 9th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Albuquerque, New Mexico, July 2004. (presented – van de Lindt)

 

6.       van de Lindt, J.W. (2004). “Reliability Analysis of Wood Shearwalls Subject to Lateral Loads.” Invited Presentation at the Forest Products Society 58th Annual Meeting, June 27-30, Grand Rapids, MI, USA. (presented – van de Lindt)

 

7.       van de Lindt, J.W. and H.A. de Melo e Silva. (2004). “Allowable Damage-Based Seismic Design of Wood Shearwalls.”  Presentation and proceedings at the 8th World Conference on Timber Engineering, Lahti, Finland, June 14-17, 2004.  (presented – van de Lindt).

 

8.       van de Lindt, J.W. and D.V. Rosowsky. (2004). “Reliability of Wood Shearwalls Subject to Wind and Earthquake Load.”  Presentation and proceedings at the 8th World Conference on Timber Engineering, Lahti, Finland, June 14-17, 2004.  (presented – van de Lindt).

 

9.       van de Lindt, J.W., T.M. Ahlborn, M.E. Lewis (2004). “Performance-Based Selection of Overhead Sign Support Structures.”  Accepted for presentation and proceedings at the 2004 Structures Congress, Nashville, TN. (Presented by van de Lindt).

 

10.   van de Lindt, J.W. (2004). “Wood Shearwall Design and Reliability Inherent in AF&PA/ASCE 16.” Proceedings of the 2004 Structures Congress, Nashville, TN.  (Presented by van de Lindt).

 

11.   van de Lindt, J.W. (2003). “Seismic Risk Based on Reliability of Structure Groups.” Response of Structures to Extreme Loading, Toronto, Canada, August 3-6, 2003, (Presented by van de Lindt).

 

12.   van de Lindt, J.W. and G. Goh (2003). “Modeling Earthquake Uncertainty by Coupling Load and Structure.”  Proceedings of the ASCE 2003 Structures Congress, Seattle WA. (Presented by van de Lindt).

 

13.   van de Lindt, J.W., H. A. de Melo e Silva, and Y. Zhou (2003). “New Performance Criteria for Reliability of Wood Shear Walls.” Proceedings of the ASCE 2003 Structures Congress, Seattle WA. (Presented by van de Lindt).

 

14.   van de Lindt, J.W. and G. Goh (2003). “Earthquake Duration Effects on Very Low-Cycle Structural Damage Estimates.”  Proceeding of the 2003 Pacific Conference on Earthquake Engineering, Christchurch, New Zealand, February 13-15, (Presented by van de Lindt).

 

15.   van de Lindt, J.W., G. Fu, Y. Zhou, and R.M. Pablo Jr. (2003). “Structural Reliability of Bridges Designed Using HS25 in the State of Michigan.” Proceedings of the 82nd Anuual Meeting of the Transportation Research Board.  (Presented by van de Lindt).

 

16.   van de Lindt, J.W. and M.A. Walz (2002). “Seismic Reliability Estimates Using a Wood Shear Wall Model,” Proceedings ASCE Structures Congress 2002, Denver, CO, April 4-6, 2002. (Presented by van de Lindt).

 

17.   van de Lindt, J.W. and M.A. Walz (2002). “Earthquake Response Statistics of a Wood Shear Wall Using a Polynomial Hysteresis Model,” Proceedings of the 7th National Conference on Earthquake Engineering, Boston, MA, July 21-25, 2002. (Presented by van de Lindt).

 

18.   van de Lindt, J.W. and J.M. Niedzwecki (2000). “Reliability Importance for Design Earthquake Identification,” Proc. of the 8th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, Indiana, July 2000. (Presented by van de Lindt).

 

19.   van de Lindt, J.W. and J.M. Niedzwecki. (2000). “A Time Variant Approach to Performance-Based Engineering,” Proc. ASCE Structures Congress 2000, Philadelphia, PA, May 2000. (Presented by van de Lindt).

 

20.   Niedzwecki, J.M. and J.W. van de Lindt (1998). “Modeling the Extreme Behavior of Ocean Waves,” Conference Record, 22nd Meeting of the U.S.-Japan Marine Facilities Panel (UJNR), October 25-November 4.

 

21.   Niedzwecki, J.M. and J.W. van de Lindt (1998). “Parametric Characterization of Surface Wave Data.” Proceedings WAVE’98 ASCE, Houston, TX, May.

 

22.   Niedzwecki, J.M. and J.W. van de Lindt (1998). “Wave Runup on Spar Platforms,” Proceedings OMAE’98, Lisbon, Portugal.

 

23.   Niedzwecki, J.M. and J.W. van de Lindt (1998). “Extreme Response and Fatigue Estimates in Directional Seas,” Proceedings ISOPE’98, May 1998. Montreal, Canada. (Presented by van de Lindt)

 

24.   Niedzwecki, J.M. and J.W. van de Lindt (1998). “Effect of Extremes on Fatigue Life Estimates of a Steel Caisson Platform,” Proceedings SEWC’98, July 1998, San Francisco, CA. (Presented by van de Lindt).

 

25.   Niedzwecki, J.M. and J.W. van de Lindt (1997). “Sensitivity of TLP Tendon Reliability Estimates to Excitation by Multi-peaked Random Seas,” Proceedings ISOPE’97, May, Honolulu, HI. (Presented by van de Lindt)  

 

26.   van de Lindt, J.W. and J.M. Niedzwecki (1996). “Inflated Contour Approach for Deepwater Tendon Design,” Proceedings 7th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability,  August, Worcester, MA (Presented by van de Lindt)

 

27.   Niedzwecki, J.M., J.W. van de Lindt, and O.R. Rijken, (1995). “Behavior of Tendon Models in Random Seas,” Proceedings 24th American Towing Tank Conference, November, College Station, TX.  (Presented by van de Lindt)

 

 

Upcoming Conferences and Annual Meetings

 

1.       van de Lindt, J.W. and H. Liu. (2006). “Correlation of Observed Damage and FEMA 356 Drift Limits: Results from a One-Story Woodframe House Shake Table Test.”  Accepted for the 2006 Structures Congress, St. Louis, MO.

 

2.       Goode, J.S. and J.W. van de Lindt. (2006). “Effect of Extreme Wind Gusts on Fatigue Life and Structural Reliability of High Mast Lighting Structural Supports.”  Accepted for the 2006 Structures Congress, St. Louis, MO.

 

3.       Gupta, R. and J.W. van de Lindt. (2006). “Damage Observation and Prediction for Wood Shearwalls Subjected to Simulated Seattle Earthquakes.” Accepted for the 2006 Structures Congress, St. Louis, MO.

 

4.       van de Lindt, J.W. and H. Liu. (2006). “Adequacy of FEMA 356 Drift Criteria in the Performance-based Seismic Design of Woodframe Structures” Accepted for the 8th National Conference on Earthquake Engineering, San Francisco, CA.

 

5.       van de Lindt, J.W. and J.M. Niedzwecki (2006). “A Slepian Model Approach to Seismic Reliability of Structures.”  Accepted for the 8th National Conference on Earthquake Engineering, San Francisco, CA.

 

6.       van de Lindt, J.W., D.V. Rosowsky, S. Pei, and W.C. Pang. (2006). “Next Generation Hysteretic Models for Development of a Performance-Based Seismic Design Philosophy for Woodframe Construction.”  Accepted for the 8th National Conference on Earthquake Engineering, San Francisco, CA.

 

7.       van de Lindt, J.W. and H. Liu. (2006). “Shake Table Testing of a Performance-Based Seismic Designed Woodframe Structure.”  Accepted for the 2006 World Conference on Timber Engineering, Portland, OR.

 

8.       W. Pang, Pei, S., J.W. van de Lindt, and D.V. Rosowsky. (2006). “Formulation of Evolutionary Parameter Hysteretic Models for Woodframe Shearwalls.” Accepted for the 2006 World Conference on Timber Engineering, Portland, OR.

 

9.       van de Lindt, J.W., D.V. Rosowsky, A. Filiatrault, M.D. Symans, R.A. Davidson. (2006). “The NEESWood Project: Progress on the Development of a Performance-Based Seismic Design Philosophy for Mid-Rise Woodframe Construction”. Accepted for the 2006 World Conference on Timber Engineering, Portland, OR.

 

10.   B.E. Ellingwood, J.W. van de Lindt, D. Gromala, D.V. Rosowsky, R. Gupta, and S. Pryor. ““Performance-Based Engineering for Light-Frame Wood Construction in the United States: Status and Challenges.” Accepted for the 2006 World Conference on Timber Engineering, Portland, OR.

 

11.   Graettinger, A., J.W. van de Lindt, R. Gupta, T. Skaggs, S. Pryor, and K. Fridley. (2006). “Overview of Wind Damage to Woodframe Structures Caused by Hurricane Katrina.” Accepted for the 2006 ASCE/SEI Structures Congress, St. Louis, MO.

 

12.   van de Lindt, J.W., A. Filiatrault, M.D. Symans, D.V. Rosowsky, R.A. Davidson. (2007). “Towards a Performance-Based Seismic Design Philosophy for Woodframe Construction”. Submitted for the 2007 Canadian Conference on Earthquake Engineering, Ottowa, Ontario, Canada.

 

13.   S. Pei and J.W. van de Lindt. (2007). “Long-Term Seismic Loss Evaluation for Woodframe Structures: A Performance-Based Procedure.” Submitted for the 2007 Canadian Conference on Earthquake Engineering, Ottowa, Ontario, Canada.