 | The cable with the black tape goes to the left sensor |
| These are bundled with the trigger cable |
| This is bundled with the sensor cables |
Things that need to be connected (Connect everything with power off!!)
| Check that the RS-232 serial cable is connected from the CPU to the controller | ||||
| Power and resolver leads from controller to the servo-motor | ||||
| Sensor cables from data acquisition box to sensors
| ||||
| Trigger cable from data acquisition to trigger
|
Servo Start-up Pacific Scientific SC750 series
| Give the controller power by undoing the emergency stop |
| Double-click the desktop icon "SERVO STARTUP" |
| Check to make sure the RPM knob is off, and the status switch is disabled |
| Press CTRL + R to download the program |