Engineering Network Services - CSU

Engineering Network Services
 

Information About Your Computer

From time to time ENS may ask you for information about the computer you are using, to help troubleshoot problems or for other support services. Here is information on how to find the information ENS asks for.

IP Address

Any Computer

Your IP Address is: 54.226.227.175
and is NOT on the CSU Network.

Computer Name

Any Lab Computer

Every ENS lab computer (including the thin client Windows Desktop and the Virtual Lab) has the computer name on the desktop, at the top left of the screen. Where it normally shows "Computer", we have changed it so that it shows the computer name, followed by the user name in parentheses. For example, it may read "MDS1C1 (joeuser)". We just need to know the computer name, which is the part before the parantheses.

NOTE:If your PC is CSU owned and was setup by ENS, your computer name will be display on the desktop in the upper
left corner of your screen where it normally shows the computer icon. We have changed it so that it shows the
computer name there. If this is your own personal computer then follow the steps below:

Windows 7

  1. Click on "Start button
  2. Right click on Computer, and then select Properties.
  3. Under Computer name, domain, and workgroup settings, you can find your computer name, and its full computer
    name if your computer is on a domain.

Windows 8.x

  1. Right click on the Start button
  2. Click System
  3. Under Computer name, domain, and workgroup settings, you can find your computer name, and its full computer
    name if your computer is on a domain.

Windows 10

  1. Click Start button and select Settings
  2. Click System
  3. Click About. Your PC name will appear next to the PC name

Mobile Desktop

Your Mobile Desktop has the computer name on the desktop, at the top left of the screen. Where it normally shows "Computer", we have changed it so that it shows the computer name, followed by the user name in parantheses. For example, it may read "ENGR-ADMIN1 (joeuser)". We just need to know the computer name, which is the part before the parantheses.

Linux, Solaris or other Unix Computer

  1. Open a command window.
  2. For IP address, type the following and press enter: ifconfig.
    You will need to wade through the results to find an IP-looking address.
  3. For computer name, type the following: hostname.
 
layout image
layout image

This document last modified Monday December 11, 2017


Engineering Network Services home page link College of Engineering home page link