IAC Publications
H. W. Edwards and J. M. Jonkman, "Pollution
Prevention and Lean Manufacturing," 2001-360,
Presented at the 94th Annual Conference & Exhibition, Air &
Waste Management Association, Orlando, FL, June, 2001.
H. W. Edwards, M. F. Kostrzewa, and J. M. Jonkman,
"Cleaner Production
through Conservation," 2000-285,
Presented at the 93rd Annual Conference & Exhibition, Air &
Waste Management Association, Salt Lake City, UT, June, 2000.
H.W. Edwards, Michael F. Kostrzewa, and Cynthia
K. Ketzenberger, "Pollution
Prevention Through Productivity Improvement."
Presented at the 92th Annual Meeting & Exhibition, Air &
Waste Management Association, St. Louis, Missouri, June 20-24, 1999.
H. W. Edwards and M. F. Kostrzewa, "Combined
Pollution Prevention Assessments," 98-MP13B.02
Presented at the 91st Annual Meeting & Exhibition, Air &
Waste Management Association, San Diego, CA, June, 1998.
H. W. Edwards and M. F. Kostrzewa, "Pollution
Prevention Assessments At Small Manufacturing Plants."
Presented at the 86th Annual Meeting & Exhibition, Air &
Waste Management Association, Denver, Colorado, June 13-18, 1992.
H. W. Edwards and M. F. Kostrzewa, "Results
From The Waste Minimization Assessment Center Program at Colorado
State University."
Presented at the Hazardous Materials Control Resources Institute
National Conference - Minimization and Recycling of Industrial and
Hazardous Waste '92, September 22-24, 1992
H. W. Edwards, M. F. Kostrzewa, P. S. Miller, and
G. P. Looby, "Waste Minimization Assessment for a Manufacturer
of Silicon-Controlled Rectifiers and Schottky Rectifiers."
U. S. Environmental Protection Agency Risk Reduction Engineering
Laboratory: Cincinnati, Ohio. EPA/600/S-92/036, September 1992.
H. W. Edwards, M. F. Kostrzewa, and G. P. Looby,
"Waste Minimization Assessment for a Manufacturer of Sheet
Metal Components." U. S. Environmental Protection Agency Risk
Reduction Engineering Laboratory: Cincinnati, Ohio. EPA/600/S-92/035,
September 1992.
H. W. Edwards, M. F. Kostrzewa, and P. S. Miller,
"Waste Minimization Assessment for a Manufacturer Producing
Printed Circuit Boards." U. S. Environmental Protection Agency
Risk Reduction Engineering Laboratory: Cincinnati, Ohio. EPA/600/S-92/033,
September 1992.
H. W. Edwards, M. F. Kostrzewa, P. S. Miller, and
G. P. Looby, "Waste Minimization Assessment for a Manufacturer
of Machined Parts." U. S. Environmental Protection Agency Risk
Reduction Engineering Laboratory: Cincinnati, Ohio. EPA/600/S-92/031,
September 1992.
H. W. Edwards, M. F. Kostrzewa, F. W. Kirsch and
J. C. Maginn, "Waste Minimization Assessment for a Manufacturer
of Finished Metal Components." U. S. Environmental Protection
Agency Risk Reduction Engineering Laboratory: Cincinnati, Ohio.
EPA/600/S-92/030, September 1992.
H. W. Edwards, M. F. Kostrzewa, and G. P. Looby,
"Waste Minimization Assessment for a Manufacturer of Cutting
and Welding Equipment." U. S. Environmental Protection Agency
Risk Reduction Engineering Laboratory: Cincinnati, Ohio. EPA/600/S-92/029,
September 1992.
D. Evetts, M. F. Kostrzewa, and H. W. Edwards,
"Pollution Prevention At An Aircraft Seat Manufacturer."
Presented at Student Poster Session of the 85th Annual Air and Waste
Management Association Annual Meeting, Kansas City, Missouri, June
22-23, 1992.
G. Caster, M. F. Kostrzewa, and H. W. Edwards,
"Pollution Prevention At A Manufacturer of Robotic Equipment."
Presented at Student Poster Session of the 85th Annual Air and Waste
Management Association Annual Meeting, Kansas City, Missouri, June
22-23, 1992.
T. Spika, M. F. Kostrzewa, and H. W. Edwards, "Pollution
Prevention At A Pliers Manufacturer."
Presented at Student Poster Session of the 85th Annual Air and Waste
Management Association Annual Meeting, Kansas City, Missouri, June
22-23, 1992.
M. F. Kostrzewa, "A Model To Simulate Solar-Assisted
Drying of Metal Hydroxide Sludge." American Society of Mechanical
Engineering: New York, 1992.
Presented at the 1992 ASME International Solar Energy Conference,
April 5-9, 1992.
D. Higgins, M. May, M. F. Kostrzewa, and H. W.
Edwards, "Solvent Use Reduction in Microelectronics and Metal
Fabrication Industries."
Presented at 1991 Hazardous Waste Research Conference, Kansas State
University, May 29-30, 1991.
M. F. Kostrzewa, "Design of a Solar Dryer
for Metal Hydroxide Sludge," Master's Thesis, Mechanical Engineering
Department, Colorado State University, Spring, 1991.
G. Leffingwell, M. May, M. F. Kostrzewa, and H.
W. Edwards, "Practical Waste Minimization."
Presented at 1990 Hazardous Waste Research Conference, Kansas State
University, May 21-22, 1990.
M. F. Kostrzewa and H. W. Edwards, "Hazardous
Waste Minimization," Proceedings of the 65th Annual Meeting
of the Southwestern and Rocky Mountain Division of the American
Association for the Advancement of Science, April, 1989.
|
