COLORADO ANEMOMETER LOAN PROGRAM
 

PROGRAM INFORMATION

Frequently Asked Questions
Colorado Wind Resource Maps
ALP Sites and Data
Small Wind Electric Systems: A Colorado Consumer's Guide
Small Wind Applications Guide Video
Donations

APPLICATION INFORMATION

Program Goals
Selection Criteria
Lessee Responsibilities
Site Layout and Anchors
Tower Safety
Data Plug Replacement
Ideal Sites
Online Application
 

WIND TURBINE RESOURCES

Zoning
Equipment Information and Dealers
Financing
Links

ABOUT US

Current and Past Personnel
Student Positions
Contact Us

RIDGWAY - Installed 9/12/2009

LOCATION DETAILS
Latitude:
N 38° 8.909’ or N 38° 8’54"
Longitude:
W 107° 44.854’ or W 107° 44’ 51"
Township:
45 N
Range:
8 W
Section:
16
Elevation (ft.):
6,986
Datum:
WGS 84
Tower Type:
NRG Tilt-Up
Tower Height (ft.):
66
Tower Height (m):
20
Vane Offset (deg):
+328°
Direction Basis:
Magnetic North
Mag. Declination:
10° 16' E, changing by 7' W/yr
Wind Explorer S/N:
0665
Site No.:
3807

 CSU ALP Install Team (from left): Eric Rasbach, Todd Mac Donald, Nikki Dunlap, Mike Kostrzewa, Daniel Fink, and Will Clapsadl (taking picture).

DATA DETAILS

September 12, 2009:

The anemometer tower was installed on September 12, 2009. The site is located on the southern end of the Ouray County fairgrounds, just east of U.S. Hwy 550. This site is located in a valley floor, with mesas and mountains on all sides. Winds are expected to come down the valley from Ouray, which is southeast of the site. The winds are expected to be strong and at times violent from this direction.

All data is collected using an NRG #40 Calibrated Anemometer and NRG #200 Wind Vane mounted on a tilt-up tower located at a height of 20m. The certification for the anemometer is as follows:

NRG #40C Calibrated Anemometer
Model No.
1900
Serial No.
179500087809
Calibration Date
10/31/2009 5:48:36 a.m.
Slope
0.756 m/s per Hz
Offset
0.37 m/s

We will have the data from the first data plug in November.


For more information Contact Us!

 



Disclaimer | Equal Opportunity | Contact CSU
© 2008 Mechanical Engineering,
Colorado State University. All Rights Reserved.
Colorado State University, Fort Collins, CO 80523 USA (970) 491-7709
Last updated: June 2009
Email questions & comments to: michael@engr.colostate.edu
This page is Javascript enabled. Turn on Javascript to view.